SD 2.4GHz -15dBi Planar Antenna

Highly efficient 802.11 compatible antennas, these 2.4GHz antennas are idealfor wall mounted, low visibility applications, but are also provided suitablefor pole mounting, and both the smaller 2.4GHz antenna types have desk orceiling mounting options. Simply choose the bracketry to suit yourapplications.

Both the 24 8080 and 24 4040 are also available in an outdoor weatherproofenclosure with or without a POE with room to install your own radio unit.

• Surge Protection Built in
• Optional adjustable tilt.
• N-type female panel mount connectors as standard but right angled N-female and SMA female panel mount connectors or a range of panal mount pigtails available on request.
• Designed for outdoor or indoor use
• Easy Installation
• Material of radome: UV protected, Acrylic Capped ABS shock resistant plastic
• Material of back: Plastic coated steel.
• Material of brackets: Galvanised steel 2mm for maximum strength/weight ratio
• Bracket fixing hole spacings: Suitable for up to 2 inch diameter pole

• Gain downlinkGp> 60dB
• Max signal strength: uplink+26dBm
• Max signal strength: downlink-25dBm
• Leds6 signal strength LEDS

• Frequency880MHz - 960MHz
• Gain downlinkGp> 60dB
• Max signal strength: uplink+26dBm
• Max signal strength: downlink-25dBm
• Leds6 signal strength LEDS

• Gain downlinkGp> 60dB
• Max signal strength: uplink+26dBm
• Max signal strength: downlink-25dBm
• Leds6 signal strength LEDS

• Frequency880MHz - 960MHz
• Gain downlinkGp> 60dB
• Max signal strength: uplink+26dBm
• Max signal strength: downlink-25dBm
• Leds6 signal strength LEDS
• Frequency2.4GHz
• Gain15
• 3dBbeam30 x 30 degrees
• PolarityV
• VSWR1.8 : 1
• Reflection-16.5dB
• Upper side lobe suppression-18dBi
• Back to front ratio24
• Cross pol ratio20
• Power rating50 W
• Impedance50 Ohms
• TerminationN-Female
• Surge protectionBuilt In
• Size (cm)23 x 24 x 3
• Windage16.2
• Weight1
• Mechanical tiltOptional extra tilt brackets available: 0 - 25 degrees
• Mounting pipe5cm
• MaterialsUV stabilised Acryic capped ABS